Product manual

Usage: ip pim-sparse nbr-timeout <60-8000>
Description: Set the neighbour loss time interval for this interface.
Default is 180 seconds.
Range: < 60 to 8000 >
no-default
■ interface vlan VLAN-ID ip irdp preference no-default
Indicates that the router should never be used as a default by its neighbors.
number
■ interface vlan VLAN-ID ip irdp preference < -2147483647 to 2147483647 >
The router preferability number. Higher values are more preferable.
Range: < -2147483647 to 2147483647 >
ospf
■ [no] interface loopback < 0 to 7 > ip ospf
Usage: [no] ip ospf [...]
Description: congure Open Shortest Path First (OSPF)
protocol parameters on the interface.
Called without 'no', the command congures OSPF parameter on
interface. Otherwise ('no' is specied), the command remove
specied ospf parameter on the interface. Use 'ip ospf ?' to
get a list of all possible options.
Next Available Options:
■ ip-addr -- Specify the IP address the request is for. (IP-ADDR) (p. 227)
■ all -- Process the request for all IP addresses.(p. 207)
■ [no] interface vlan VLAN-ID ip ospf
Usage: [no] ip ospf [...]
Description: Enable/disable/congure Open Shortest Path First (OSPF)
protocol on the VLAN interface.
Called without 'no', the command enables OSPF on the interface.
Otherwise ('no' is specied), the command disables OSPF on the
interface. The command can be followed by an OSPF conguration
command. Use 'ip ospf ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■ passive -- Configures an ospf interface as passive. (p. 245)
■ area -- Specify an OSPF area.(p. 209)
■ authentication-key -- Set simple authentication method and key.(p. 211)
■ authentication -- Disable authentication.(p. 210)
■ md5-auth-key-chain -- Set MD5 authentication method and key chain.(p. 235)
■ cost < 1 to 65535 > -- Set metric of this interface.(p. 216)
243© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide