Product manual

Next Available Option:
■ mirror -- Mirror destination.(p. 236)
■ interface svlan VLAN-ID monitor ip access-group ACCESS-GROUP < In >
Usage: [no] mirror-port [[ethernet] PORT-NUM]
Description: Dene the mirror port for diagnostic purposes. The device
ports or VLAN (if VLANs are enabled on the device) that will
be monitored are dened through the 'monitor' command in
either VLAN or interface context.
The network trafc seen by the monitored ports is copied to
the mirror port to which a network analyzer can be attached.
When mirroring multiple ports in a busy network,
some frames may not be copied to the monitoring port.
Parameters: PORT-NUM - Port that will be acting as the monitoring port. It
cannot be a trunked port. The parameter must be specied,
if the 'no' keyword is not used. Otherwise, it must not be
present.
Supported Values:
■ In -- Monitor inbound traffic permitted by the ACL
Next Available Option:
■ mirror -- Mirror destination.(p. 236)
monitor_mirror_session_id
■ [no] interface [ETHERNET] PORT-LIST monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
■ [no] interface [ETHERNET] PORT-LIST monitor ip access-group ACCESS-GROUP < In > mirror
< 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
■ [no] interface vlan VLAN-ID monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
■ [no] interface vlan VLAN-ID monitor ip access-group ACCESS-GROUP < In > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
■ [no] interface svlan VLAN-ID monitor all < In | Out | Both > mirror < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
■ [no] interface svlan VLAN-ID monitor ip access-group ACCESS-GROUP < In > mirror < 1 to 4 >
241© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide