Product manual

By default UDLD control packets are untagged.

The user has to give vlan-id for tagged UDLD control packets.

Next Available Option:

■ vlan -- Set vlan-id for tagged UDLD control packets. (VLAN-ID) (p. 266)

link-local

■ [no] interface vlan VLAN-ID ipv6 address IPV6-ADDR link-local

Congure a link-local IPv6 address.

■ [no] interface svlan VLAN-ID ipv6 address IPV6-ADDR link-local

Congure a link-local IPv6 address.

local-proxy-arp

■ [no] interface vlan VLAN-ID ip local-proxy-arp

Usage: [no] ip local-proxy-arp

Description: Enable/disable local proxy ARP. This is a VLAN context command.

It can be called directly from the VLAN context or may follow

the 'vlan VLAN-ID' command prex. When local proxy ARP is

enabled on a VLAN, the device responds to all ARP requests

received on the VLAN ports with it's own hardware address.

loopback

■ [no] interface loopback < 0 to 7 >

Usage: [no] interface loopback <num>

Description: Enter the loopback Conguration Level.

Range: < 0 to 7 >

Next Available Option:

■ ip -- Configure various IP parameters for the Loopback(p. 225)

lowest

■ interface vlan VLAN-ID vrrp vrid < 1 to 255 > primary-ip-address lowest

Dynamically determine lowest IP address.

mac-address

■ interface vlan VLAN-ID ip-recv-mac-address MAC-ADDR

The L3-mac-address to be associated with a VLAN.

Next Available Option:

■ interval -- Specify the L3-Mac-Address timeout interval. (p. 225)

interfaceCommand Line Interface Reference Guide