Product manual

join-timer
■ interface [ETHERNET] PORT-LIST gvrp join-timer < 20 to 75 >
Set join timer value (centiseconds; default 20).
Range: < 20 to 75 >
jumbo
■ [no] interface vlan VLAN-ID jumbo
Usage: [no] jumbo
Description: Labels this VLAN as a Jumbo VLAN, allowing you to pass
packets up to 9220 bytes in size.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
■ [no] interface svlan VLAN-ID jumbo
Usage: [no] jumbo
Description: Labels this VLAN as a Jumbo VLAN, allowing you to pass
packets up to 9220 bytes in size.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
kbps
■ interface [ETHERNET] PORT-LIST rate-limit icmp kbps < 0 to 10000000 >
Specify kilobits-per-second limit of allowed ICMP trafc (values should be at least
13Kbps, or max-length ICMP packets will fail.)
Range: < 0 to 10000000 >
■ interface [ETHERNET] PORT-LIST rate-limit all in kbps < 0 to 10000000 >
Specify limit of allowed inbound or outbound trafc in kilobits-per-second on the
specied port(s). Actual limits are in steps of 100Kbps to 100Mbps (granularity is
1% of the lowest related media speed).
Range: < 0 to 10000000 >
■ interface [ETHERNET] PORT-LIST rate-limit all out kbps < 0 to 10000000 >
Specify limit of allowed inbound or outbound trafc in kilobits-per-second on the
specied port(s). Actual limits are in steps of 100Kbps to 100Mbps (granularity is
1% of the lowest related media speed).
Range: < 0 to 10000000 >
■ interface [ETHERNET] PORT-LIST rate-limit ip access-group ACCESS-GROUP < in > kbps < 1 to
10000000 >
Specify rate-limit in kilo-bits-per-second.
Range: < 1 to 10000000 >
lacp
■ [no] interface [ETHERNET] PORT-LIST lacp
232© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide