Product manual

■ local-proxy-arp -- Enable/disable local proxy ARP(p. 234)

■ helper-address -- Add or remove a DHCP server IP address for the VLAN (IP-ADDR) (p. 223)

■ forward-protocol -- Add or remove a UDP server address for the VLAN(p. 221)

■ igmp -- Enable/disable/configure IP Multicast Group Protocol (IGMP) feature on a VLAN(p. 224)

■ irdp -- Configure ICMP Router Discovery Protocol (IRDP)(p. 231)

■ ospf -- Enable/disable/configure Open Shortest Path First (OSPF) protocol on the VLAN

interface(p. 243)

■ rip -- Enable/disable/configure Routing Internet Protocol (RIP) on the VLAN interface(p. 259)

■ pim-dense -- Enable/disable/configure PIM-DM protocol on the VLAN interface(p. 245)

■ pim-sparse -- Enable/disable/configure PIM-SM protocol on the VLAN interface(p. 246)

■ mroute -- Configure IP Multicast Routing parameters on the VLAN interface(p. 242)

■ [no] interface vlan VLAN-ID monitor ip

Apply an IPv4 access list.

Next Available Option:

■ access-group -- Define the mirror port for diagnostic purposes (ASCII-STR) (p. 201)

■ interface svlan VLAN-ID ip

Usage: [no] ip ...

Description: Congure various IP parameters for the VLAN. The 'ip'

command must be followed by a feature-specic keyword.

Use 'ip ?' to get a list of all possible options.

This is a VLAN context command. It can be called directly

from the VLAN context or follow the 'vlan VLAN-ID'

command.

Next Available Options:

■ access-group -- Apply the specified access control list on this VLAN interface (ASCII-STR) (p.

201)

■ address -- Set IP parameters for communication within an IP network(p. 203)

■ [no] interface svlan VLAN-ID monitor ip

Apply an IPv4 access list.

Next Available Option:

■ access-group -- Define the mirror port for diagnostic purposes (ASCII-STR) (p. 201)

ip-addr

■ [no] interface loopback < 0 to 7 > ip address IP-ADDR

Interface IP address.

■ [no] interface loopback < 0 to 7 > ip ospf IP-ADDR

Specify the IP address the request is for.

interfaceCommand Line Interface Reference Guide