Product manual

Next Available Option:
■ access-group -- Apply the specified access control list to inbound packets on this INTERFACE
list (ASCII-STR) (p. 201)
■ [no] interface [ETHERNET] PORT-LIST monitor ip
Apply an IPv4 access list.
Next Available Option:
■ access-group -- Define the mirror port for diagnostic purposes (ASCII-STR) (p. 201)
■ [no] interface [ETHERNET] PORT-LIST rate-limit ip
Usage: [no] ip access-group <ACL-ID> in
Description: Apply the specied access control list to inbound
packets on this INTERFACE list. The access
control list ACL-ID must be dened before it can be applied.
Next Available Option:
■ access-group -- Apply the specified access control list to inbound packets on this INTERFACE
list(p. 201)
■ [no] interface loopback < 0 to 7 > ip
Usage: [no] ip ...
Description: Congure various IP parameters for the Loopback. The 'ip'
command must be followed by a feature-specic keyword.
Use 'ip ?' to get a list of all possible options.
This is a Loopback context command. It can be called directly
from the Loopback context or follow the 'interface loopback
<num>' command.
Next Available Options:
■ address -- Set IP parameters for communication within an IP network(p. 203)
■ ospf -- configure Open Shortest Path First (OSPF) protocol parameters on the interface(p. 243)
■ interface vlan VLAN-ID ip
Usage: [no] ip ...
Description: Congure various IP parameters for the VLAN. The 'ip'
command must be followed by a feature-specic keyword.
Use 'ip ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■ access-group -- Apply the specified access control list on this VLAN interface (ASCII-STR) (p.
201)
■ address -- Set IP parameters for communication within an IP network(p. 203)
■ proxy-arp -- Enable/disable proxy ARP(p. 254)
226© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide