Product manual
Usage: [no] igmp-proxy DOMAIN-NAME
Description: Associate an IGMP proxy domain with a VLAN.
If the 'no' keyword is used:
If the DOMAIN-NAME is left blank, all the domains
associated with the respective VLAN will be disassociated.
If a DOMAIN-NAME is specied, The specied domain will
be disassociated from the respecive VLAN.
If the 'no' keyword is not used:
If the DOMAIN-NAME matches the domain name of an
existing domain, the respective domain will be associated
with the respective VLAN.
Next Available Option:
■ domain-name < END OF PRINTABLE > -- Specify the domain name to associate/disassociate
with the VLAN. (ASCII-STR) (p. 218)
in
■ [no] interface [ETHERNET] PORT-LIST rate-limit all in
Set limits for all inbound trafc.
Next Available Options:
■ percent < 0 to 100 > -- Specify limit as percent of inbound or outbound traffic.(p. 245)
■ kbps < 0 to 10000000 > -- Specify limit of allowed inbound or outbound traffic in
kilobits-per-second on the specified port(s). Actual limits are in steps of 100Kbps to 100Mbps
(granularity is 1% of the lowest related media speed). (p. 232)
interval
■ interface vlan VLAN-ID ip igmp querier interval < 5 to 300 >
Sets the interval in seconds between IGMP queries
(default: 125)
Range: < 5 to 300 >
■ interface vlan VLAN-ID ip-recv-mac-address MAC-ADDR interval
Specify the L3-Mac-Address timeout interval.
Next Available Option:
■ timer-interval < 1 to 255 > -- Timeout interval in seconds <1-255>. (p. 263)
ip
■ [no] interface [ETHERNET] PORT-LIST ip
Usage: [no] ip access-group <ACL-ID> in
Description: Apply the specied access control list to inbound
packets on this INTERFACE list. The access
control list ACL-ID must be dened before it can be applied.
225© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide