Product manual
Obtain IPv6 address & Conguration information from DHCPv6 server.
Next Available Option:
■ rapid-commit -- Obtain IPv6 address quickly from DHCPv6 server.(p. 257)
graft-retry-interval
■ interface vlan VLAN-ID ip pim-dense graft-retry-interval < 1 to 10 >
Usage: ip pim-dense graft-retry-interval <1-10>
Description: Set the interval a PIM router waits for a Graft Ack before
resending a Graft on this interface. Default value is 3
seconds.
Range: < 1 to 10 >
gvrp
■ interface [ETHERNET] PORT-LIST gvrp
Usage: gvrp [join-timer <n>][leave-timer <n>][leaveall-timer <n>]
Description: Set the GVRP timers on the port (hundredths of a second).
The timers must follow the constraints
2 * join-timer <= leave-timer < leaveall-timer
Next Available Options:
■ join-timer < 20 to 75 > -- Set join timer value (centiseconds; default 20).(p. 232)
■ leave-timer < 40 to 300 > -- Set leave timer value (centiseconds; default 300).(p. 233)
■ leaveall-timer < 500 to 3000 > -- Set leaveall timer value (centiseconds; default 1000).(p. 233)
hello-delay
■ interface vlan VLAN-ID ip pim-dense hello-delay < 0 to 5 >
Usage: ip pim-dense hello-delay <0-5>
Description: Set the maximum time before a triggered PIM Hello message is
transmitted on this interface. Default value is 5 seconds.
Range: < 0 to 5 >
■ interface vlan VLAN-ID ip pim-sparse hello-delay < 0 to 5 >
Usage: ip pim-sparse hello-delay <0-5>
Description: Set the maximum time before a triggered PIM Hello message is
transmitted on this interface. Default value is 5 seconds.
Range: < 0 to 5 >
hello-interval
■ interface vlan VLAN-ID ip ospf hello-interval < 1 to 65535 >
Set hello interval in seconds; the default is 10.
Range: < 1 to 65535 >
222© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide