Product manual

■ interface vlan VLAN-ID ip igmp auto [ETHERNET] PORT-LIST

Usage: ip igmp auto [ethernet] PORT-LIST

Description: Instruct the device to monitor incoming multicast trafc

on the specied ports (this is the default behavior). This

feature is congured on a per-VLAN basis.

■ interface vlan VLAN-ID ipv6 mld auto [ETHERNET] PORT-LIST

Usage: vlan < vid > ipv6 mld auto < port-list >

Description: Instruct the device to monitor incoming multicast trafc

on the specied ports (this is the default behavior). This

feature is congured on a per-VLAN basis.

■ interface svlan VLAN-ID auto [ETHERNET] PORT-LIST

Usage: [no] auto [ethernet] PORT-LIST

Description: Cause each port identied in the port list to learn its

VLAN membership using the GARP VLAN Registration Protocol

(GVRP). This command is only valid when GVRP is enabled.

This is a VLAN context command. It can be called directly

from the VLAN context or follow the 'vlan VLAN-ID'

command.

autoconfig

■ [no] interface vlan VLAN-ID ipv6 address autoconfig

Automatic address conguration.

■ [no] interface svlan VLAN-ID ipv6 address autoconfig

Automatic address conguration.

backbone

■ interface loopback < 0 to 7 > ip ospf IP-ADDR area backbone