Product manual

■ [no] interface vlan VLAN-ID ip rip all authentication-key
Set RIP authentication key (maximum 16 characters).
Next Available Option:
■ auth-key-text -- Set RIP authentication key (maximum 16 characters). (OCTET-STR) (p. 212)
authentication-type
■ interface vlan VLAN-ID ip rip authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
■ none -- Do not use authentication.
■ text -- Use simple password.
■ interface vlan VLAN-ID ip rip IP-ADDR authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
■ none -- Do not use authentication.
■ text -- Use simple password.
■ interface vlan VLAN-ID ip rip all authentication-type < none | text >
Set authentication type used on this interface.
Supported Values:
■ none -- Do not use authentication.
■ text -- Use simple password.
auth-key-text
■ interface vlan VLAN-ID ip rip authentication-key OCTET-STR
Set RIP authentication key (maximum 16 characters).
■ interface vlan VLAN-ID ip rip IP-ADDR authentication-key OCTET-STR
Set RIP authentication key (maximum 16 characters).
■ interface vlan VLAN-ID ip rip all authentication-key OCTET-STR
Set RIP authentication key (maximum 16 characters).
auto
■ interface vlan VLAN-ID auto [ETHERNET] PORT-LIST
Usage: [no] auto [ethernet] PORT-LIST
Description: Cause each port identied in the port list to learn its
VLAN membership using the GARP VLAN Registration Protocol
(GVRP). This command is only valid when GVRP is enabled.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
212© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide