Product manual
specifying how much power this port should be allocated by
either its class or a user-dened value.
Supported Values:
■ usage
■ class
■ value
any
■ interface vlan VLAN-ID ip pim-dense ip-addr any
Dynamically determine IP address.
■ interface vlan VLAN-ID ip pim-sparse ip-addr any
Dynamically determine IP address.
anycast
■ [no] interface vlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN anycast
Address that is assigned to a set of interfaces that typically belong to different
nodes
■ [no] interface svlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN anycast
Address that is assigned to a set of interfaces that typically belong to different
nodes
area
■ interface loopback < 0 to 7 > ip ospf IP-ADDR area
Specify an OSPF area.
Next Available Options:
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 210)
■ backbone -- The backbone area (the same as 0.0.0.0).(p. 213)
■ interface loopback < 0 to 7 > ip ospf all area
Specify an OSPF area.
Next Available Options:
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 210)
■ backbone -- The backbone area (the same as 0.0.0.0).(p. 213)
■ interface vlan VLAN-ID ip ospf area
Specify an OSPF area.
Next Available Options:
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 210)
■ backbone -- The backbone area (the same as 0.0.0.0).(p. 213)
■ interface vlan VLAN-ID ip ospf IP-ADDR area
209© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide