Product manual

Description: Set time interval (in seconds) between sending VRRP advertisement
messages. The default value is one second.
Range: < 1 to 255 >
all
■ [no] interface [ETHERNET] PORT-LIST monitor all < In | Out | Both >
Monitor all trafc.
Supported Values:
■ In -- Monitor all inbound traffic
■ Out -- Monitor all outbound traffic
■ Both -- Monitor all inbound and outbound traffic
Next Available Option:
■ mirror -- Mirror destination.(p. 236)
■ [no] interface [ETHERNET] PORT-LIST rate-limit all
Set limits for all trafc.
Next Available Options:
■ in -- Set limits for all inbound traffic.(p. 225)
■ out -- Set limits for all outbound traffic.(p. 244)
■ [no] interface loopback < 0 to 7 > ip ospf all
Process the request for all IP addresses.
Next Available Options:
■ area -- Specify an OSPF area.(p. 209)
■ cost < 1 to 65535 > -- Set metric of this interface.(p. 216)
■ [no] interface vlan VLAN-ID ip ospf all
Process the request for all IP addresses.
Next Available Options:
■ passive -- Configures an ospf interface as passive. (p. 245)
■ area -- Specify an OSPF area.(p. 209)
■ authentication-key -- Set simple authentication method and key.(p. 211)
■ authentication -- Disable authentication.(p. 210)
■ md5-auth-key-chain -- Set MD5 authentication method and key chain.(p. 235)
■ cost < 1 to 65535 > -- Set metric of this interface.(p. 216)
■ dead-interval < 1 to 65535 > -- Set dead interval in seconds; the default is 40.(p. 216)
■ hello-interval < 1 to 65535 > -- Set hello interval in seconds; the default is 10.(p. 222)
■ priority < 0 to 255 > -- Set priority of this router as a designated router.(p. 251)
■ retransmit-interval < 1 to 3600 > -- Set retransmit interval in seconds; the default is 5.(p. 259)
■ transit-delay < 1 to 3600 > -- Set transit delay in seconds; the default is 1.(p. 263)
■ [no] interface vlan VLAN-ID ip rip all
207© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide