Product manual

no-default -- Indicates that the router should never be used as a default by its
neighbors. (p. 243)
■
■ number < -2147483647 to 2147483647 > -- The router preferability number. Higher
values are more preferable. (p. 243)
■ local-proxy-arp -- Enable/disable local proxy ARP (p. 234)
■ mroute -- Configure IP Multicast Routing parameters on the VLAN interface (p. 242)
■ ttl-threshold < 0 to 255 > -- Set the multicast datagram TTL threshold for the interface
(p. 264)
■ ospf -- Enable/disable/configure Open Shortest Path First (OSPF) protocol on the VLAN
interface (p. 243)
■ all -- Process the request for all IP addresses. (p. 207)
■ area -- Specify an OSPF area. (p. 209)
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p.
210)
■ backbone -- The backbone area (the same as 0.0.0.0). (p. 213)
■ authentication -- Disable authentication. (p. 210)
■ authentication-key -- Set simple authentication method and key. (p. 211)
■ authentication-key -- OSPF authentication key (maximum 8 characters).
(OCTET-STR) (p. 211)
■ cost < 1 to 65535 > -- Set metric of this interface. (p. 216)
■ dead-interval < 1 to 65535 > -- Set dead interval in seconds; the default is 40. (p. 216)
■ hello-interval < 1 to 65535 > -- Set hello interval in seconds; the default is 10. (p. 222)
■ md5-auth-key-chain -- Set MD5 authentication method and key chain. (p. 235)
■ chain-name -- Specify key chain to use for MD5 authentication. (ASCII-STR) (p.
215)
■ passive -- Configures an ospf interface as passive. (p. 245)
■ priority < 0 to 255 > -- Set priority of this router as a designated router. (p. 251)
■ retransmit-interval < 1 to 3600 > -- Set retransmit interval in seconds; the default is
5. (p. 259)
■ transit-delay < 1 to 3600 > -- Set transit delay in seconds; the default is 1. (p. 263)
■ area -- Specify an OSPF area. (p. 209)
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p. 210)
■ backbone -- The backbone area (the same as 0.0.0.0). (p. 213)
■ authentication -- Disable authentication. (p. 210)
■ authentication-key -- Set simple authentication method and key. (p. 211)
■ authentication-key -- OSPF authentication key (maximum 8 characters). (OCTET-STR)
(p. 211)
■ cost < 1 to 65535 > -- Set metric of this interface. (p. 216)
■ dead-interval < 1 to 65535 > -- Set dead interval in seconds; the default is 40. (p. 216)
■ hello-interval < 1 to 65535 > -- Set hello interval in seconds; the default is 10. (p. 222)
■ ip-addr -- Specify the IP address the request is for. (IP-ADDR) (p. 227)
■ area -- Specify an OSPF area. (p. 209)
■ area-id -- Single integer or IP address style dotted decimal. (OSPF-AREA-ID) (p.
210)
■ backbone -- The backbone area (the same as 0.0.0.0). (p. 213)
■ authentication -- Disable authentication. (p. 210)
■ authentication-key -- Set simple authentication method and key. (p. 211)
■ authentication-key -- OSPF authentication key (maximum 8 characters).
(OCTET-STR) (p. 211)
■ cost < 1 to 65535 > -- Set metric of this interface. (p. 216)
■ dead-interval < 1 to 65535 > -- Set dead interval in seconds; the default is 40. (p. 216)
■ hello-interval < 1 to 65535 > -- Set hello interval in seconds; the default is 10. (p. 222)
■ md5-auth-key-chain -- Set MD5 authentication method and key chain. (p. 235)
196© 2008 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide