Product manual

o high - Precongured high threshold value.
o limitValue - User congured threshold value.
COMMAND STRUCTURE
■ [no] instrumentation collection -- (p. 187)
■ [no] instrumentation monitor -- Enables/Disables instrumentation monitoring (p. 187)
■ log -- Enables/Disables instrumenation monitoring log. (p. 187)
■ monitor < all | arp-requests | ip-address-count | ... > -- Enables/Disables instrumentation
monitoring (p. 187)
■ limitValue < 1 to 2147483647 > -- Set the threshold Value. (NUMBER) (p. 187)
■ threshold-value < low | med | high > -- Set the threshold Value. (p. 189)
■ trap -- Enables/Disables SNMP trap generation. (p. 190)
COMMAND DETAILS
threshold-value (p. 189)log (p. 187)collection (p. 187)
trap (p. 190)monitor (p. 187)limitValue (p. 187)
collection
■ [no] instrumentation collection
limitValue
■ instrumentation monitor < all | arp-requests | ip-address-count | ... > < 1 to 2147483647 >
Set the threshold Value.
Range: < 1 to 2147483647 >
log
■ [no] instrumentation monitor log
Enables/Disables instrumenation monitoring log.
monitor
■ [no] instrumentation monitor
Usage: [no] instrumentation monitor [ [<all|arp-requests|ip-address-count|
learn-discards|login-failures|mac-moves|
mac-address-count|pkts-to-closed-ports|
port-auth-failures|system-resource-usage|
system-delay> [<low|med|high|limitValue>]] ]
[no] instrumentation monitor [trap]
[no] instrumentation monitor [log]
Description: Enables/Disables instrumentation monitoring.
The rst version of the command enables/disables instrumentation
monitoring and sets threshold value. By default instrumentation
monitoring for all parameter is disabled. The command
'instrumentation monitor all' sets the threshold of each parameter
to their medium values. The single command 'instrumentation monitor'
enables/disables instrumentation monitoring for all parameters
and also enables/disables instrumentation monitoring log.
The second version of the command enables/disables
SNMP trap generation. By default SNMP trap generation is disabled.
Traps are generated if SNMP trap is enabled and counter value
187© 2008 Hewlett-Packard Development Company, L.P.
instrumentationCommand Line Interface Reference Guide