Product manual

Next Available Options:
■ card -- Enter single slot identifier. (SLOT-ID-RANGE) (p. 100)
■ mm -- Copy from the management card.(p. 116)
■ tftp -- Copy data to a TFTP server.(p. 122)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 133)
■ usb -- Copy data to a USB flash drive.(p. 131)
crash-log
■ copy crash-log
Copy the switch log le.
Next Available Options:
■ card -- Enter single slot identifier. (SLOT-ID-RANGE) (p. 100)
■ mm -- Copy from the management card.(p. 116)
■ tftp -- Copy data to a TFTP server.(p. 122)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 133)
■ usb -- Copy data to a USB flash drive.(p. 131)
cv_flash
■ copy tftp flash IP-ADDR FILENAME < primary | secondary >
Copy to primary/secondary ash.
Supported Values:
■ primary -- Copy to primary flash.
■ secondary -- Copy to secondary flash.
■ copy tftp flash IPV6-ADDR FILENAME < primary | secondary >
Copy to primary/secondary ash.
Supported Values:
■ primary -- Copy to primary flash.
■ secondary -- Copy to secondary flash.
■ copy xmodem flash < primary | secondary >
Copy to primary/secondary ash.
Supported Values:
■ primary -- Copy to primary flash.
■ secondary -- Copy to secondary flash.
■ copy usb flash IMAGE-NAME < primary | secondary >
Copy to primary/secondary ash.
Supported Values:
■ primary -- Copy to primary flash.
102© 2008 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide