Product manual

command-output
■ copy command-output COMMAND-OUTPUT
Specify a CLI command to copy output of.
Next Available Options:
■ tftp -- Copy data to a TFTP server.(p. 122)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 133)
■ usb -- Copy data to a USB flash drive.(p. 131)
config
■ copy tftp config CONFIG
Copy data to specied conguration le.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 124)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 127)
■ copy xmodem config CONFIG
Copy data to specied conguration le.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 130)
■ pc -- Change CR/LF to PC style.(p. 119)
■ copy config < config | new >
Copy named conguration le.
Supported Values:
■ config
■ new
Next Available Options:
■ config -- Copy data to specified configuration file. (ASCII-STR) (p. 101)
■ tftp -- Copy data to a TFTP server.(p. 122)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 133)
■ copy config < config | new > config CONFIG
Copy data to specied conguration le.
crash-data
■ copy crash-data
Copy the switch crash data le.
101© 2008 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide