Product manual

■ copy usb autorun-key-file
Copy autorun key le to the switch.
Next Available Option:
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 103)
card
■ copy crash-data SLOT-ID-RANGE
Enter single slot identier.
Next Available Options:
■ tftp -- Copy data to a TFTP server.(p. 122)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 133)
■ usb -- Copy data to a USB flash drive.(p. 131)
■ copy crash-log SLOT-ID-RANGE
Enter single slot identier.
Next Available Options:
■ tftp -- Copy data to a TFTP server.(p. 122)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 133)
■ usb -- Copy data to a USB flash drive.(p. 131)
command-file
■ copy tftp command-file
Copy command script to switch and execute.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 124)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 127)
■ copy xmodem command-file
Copy command script to switch and execute.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 130)
■ pc -- Change CR/LF to PC style.(p. 119)
■ copy usb command-file
Copy command script to switch and execute.
Next Available Option:
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 103)
100© 2008 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide