Specifications
Table Of Contents
- HP 8200 zl Switches
- Installation and Getting Started Guide
- Contents
- Introducing the HP 8200 zl Switches
- Installing the HP 8200 zl Switches
- Included Parts
- Power Cords
- Installation Procedures
- Summary
- Installation Precautions
- 1. Prepare the Installation Site
- 2. Mount the Switch Chassis
- 3. Install the Switch Modules
- 4. Install the Power Supplies
- 5. Verify the Switch Passes Self Test
- 6. Install the Grounding Wire
- 7. Connect the Switch to a Power Source
- 8. (Optional) Connect a Power Supply Shelf to the switch
- 9. Connect the Network Devices
- 10. (Optional) Connect a Console to the Switch
- Hot Swapping Switch Modules
- Example Network Topologies
- Getting Started With Switch Configuration
- Replacing Components
- Troubleshooting
- Specifications
- Switch Ports and Network Cables
- Cabling and Technology Information Specifications
- Mode Conditioning Patch Cord
- Twisted-Pair Cable/Connector Pin-Outs
- Safety and Regulatory Statements
- Recycle Statements
- Index
- Installation and Getting Started Guide

1-18
Introducing the HP 8200 zl Switches
Switch Accessories
Introducing the HP 8200 zl
Switches
■ 24-port 10/100/1000-T zl PoE Module (J8702A) -- which can provide Power
over Ethernet (PoE) power to 802.3af compliant (and some pre-standard)
devices.
■ 20-port Gig-T and 4-port mini-GBIC/SFP zl PoE Module (J8705A)
■ 24-port mini-GBIC zl Module (J8706A)
■ 4-port 10Gig-X2 zl Module (J8707A)
■ 4-port 10Gig-CX4 zl Module (J8708A)
■ ONE Services zl Module (J9289A)
■ Redundant Wireless Services zl Module (J9052A)
■ Wireless Edge Services zl Module (J9154x) where “x” is the version letter
A, B, and so on
■ 24-port Gig-T PoE+ v2 zl Module (J9534A)
■ 20-port GT PoE+/4-port SFP v2 zl Module (J9535A)
■ 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module (J9536A)
■ 24-port SFP v2 zl Module (J9537A)
■ 8-port 10-GbE SFP+ v2 zl Module (J9538A)
■ 8-port 10GBase-T v2 zl Module (J9546A)
■ 24-port 10/100 PoE+ v2 zl Module (9547A)
■ 20-port Gig-T / 2-port 10-GbE SFP+ v2 zl Module (J9548A)
■ 20-port Gig-T / 4-port SFP v2 zl Module (J9549A)
■ 24-port Gig-T v2 zl Module (J9550A)
■ 12-port Gig-T / 12-port SFP v2 zl Module (J9637A)
Note For detailed information about the zl modules, refer to the HP Switch zl
Modules Installation Guide.
For detailed information about PoE and PoE+ devices, refer to the HP Power
over Ethernet (PoE/PoE+) Planning and Implementation Guide.
To view or download this guide, visit www.hp.com/networking/support.