Specifications
Table Of Contents
- HP 8200 zl Switches
- Installation and Getting Started Guide
- Contents
- Introducing the HP 8200 zl Switches
- Installing the HP 8200 zl Switches
- Included Parts
- Power Cords
- Installation Procedures
- Summary
- Installation Precautions
- 1. Prepare the Installation Site
- 2. Mount the Switch Chassis
- 3. Install the Switch Modules
- 4. Install the Power Supplies
- 5. Verify the Switch Passes Self Test
- 6. Install the Grounding Wire
- 7. Connect the Switch to a Power Source
- 8. (Optional) Connect a Power Supply Shelf to the switch
- 9. Connect the Network Devices
- 10. (Optional) Connect a Console to the Switch
- Hot Swapping Switch Modules
- Example Network Topologies
- Getting Started With Switch Configuration
- Replacing Components
- Troubleshooting
- Specifications
- Switch Ports and Network Cables
- Cabling and Technology Information Specifications
- Mode Conditioning Patch Cord
- Twisted-Pair Cable/Connector Pin-Outs
- Safety and Regulatory Statements
- Recycle Statements
- Index
- Installation and Getting Started Guide
1-3
Introducing the HP 8200 zl Switches
Overview of the 8200 zl Switches
Introducing the HP 8200 zl
Switches
8212 zl Switch
Note The previously available 8212 zl base system (J8715A) shipped with Intelligent
Edge and Advanced Routing features standard. Going forward, customers
requiring an 8212 zl with Advanced Routing features should order the J9641A
8212 v2 zl Switch with Premium Software.
1. The HP 8212-92G-PoE+/2XG-SFP+ v2 zl Switch with Premium Software
(J9639A) ships with the 8212 zl, 12-slot chassis and the following:
• Three HP 24-port Gig-T PoE+ v2 zl Module (J9534A)
• One HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module
(J9536A)
• One 1500W PoE+ zl Power Supply (J9306A)
• With premium software activated
2. The HP 8212 v2 zl Switch with Premium Software (J9641A) ships with the
8212 zl, 12-slot chassis (J8715A/B) and the following:
• With premium software activated
• One management module
• One system support module
• Two fabric modules
• A pre-installed fan tray
• Intelligent Edge features and IP Base Routing features standard
Figure 1-2. HP 8212 zl Switch (J8715A/B shown with optional modules)