Specifications
Table Of Contents
- HP 8200 zl Switches
- Installation and Getting Started Guide
- Contents
- Introducing the HP 8200 zl Switches
- Installing the HP 8200 zl Switches
- Included Parts
- Power Cords
- Installation Procedures
- Summary
- Installation Precautions
- 1. Prepare the Installation Site
- 2. Mount the Switch Chassis
- 3. Install the Switch Modules
- 4. Install the Power Supplies
- 5. Verify the Switch Passes Self Test
- 6. Install the Grounding Wire
- 7. Connect the Switch to a Power Source
- 8. (Optional) Connect a Power Supply Shelf to the switch
- 9. Connect the Network Devices
- 10. (Optional) Connect a Console to the Switch
- Hot Swapping Switch Modules
- Example Network Topologies
- Getting Started With Switch Configuration
- Replacing Components
- Troubleshooting
- Specifications
- Switch Ports and Network Cables
- Cabling and Technology Information Specifications
- Mode Conditioning Patch Cord
- Twisted-Pair Cable/Connector Pin-Outs
- Safety and Regulatory Statements
- Recycle Statements
- Index
- Installation and Getting Started Guide
1-2
Introducing the HP 8200 zl Switches
Overview of the 8200 zl Switches
Introducing the HP 8200 zl
Switches
Overview of the 8200 zl Switches
8206 zl Switches
1. The HP 8206-44G-PoE+/2XG-SFP+ v2 zl Switch with Premium Software
(J9638A) ships with the 8206 zl, 6-slot chassis and the following:
• One HP 24-port Gig-T PoE+ v2 zl Module (J9534A)
• One HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module
(J9536A)
• One 1500W PoE+ zl Power Supply (J9306A)
• With premium software activated
2. The HP 8206 v2 zl Switch with Premium Software (J9640A) ships with the
8206 zl, 6-slot chassis (J9475A) and the following:
• With premium software activated
• One management module
• One system support module
• Two fabric modules
• A pre-installed fan tray
Figure 1-1. HP 8206 zl Switch (J9475A shown with optional modules)