Specifications
Table Of Contents
- HP 8200 zl Switches
- Installation and Getting Started Guide
- Contents
- Introducing the HP 8200 zl Switches
- Installing the HP 8200 zl Switches
- Included Parts
- Power Cords
- Installation Procedures
- Summary
- Installation Precautions
- 1. Prepare the Installation Site
- 2. Mount the Switch Chassis
- 3. Install the Switch Modules
- 4. Install the Power Supplies
- 5. Verify the Switch Passes Self Test
- 6. Install the Grounding Wire
- 7. Connect the Switch to a Power Source
- 8. (Optional) Connect a Power Supply Shelf to the switch
- 9. Connect the Network Devices
- 10. (Optional) Connect a Console to the Switch
- Hot Swapping Switch Modules
- Example Network Topologies
- Getting Started With Switch Configuration
- Replacing Components
- Troubleshooting
- Specifications
- Switch Ports and Network Cables
- Cabling and Technology Information Specifications
- Mode Conditioning Patch Cord
- Twisted-Pair Cable/Connector Pin-Outs
- Safety and Regulatory Statements
- Recycle Statements
- Index
- Installation and Getting Started Guide
A-3
Specifications
Specifications
Safety
■ EN60950
■ CSA 22.2 No. 60950
■ UL 60950
■ IEC 60950
EMC compliance (Class A)
Complies with:
■ VCCI
■ EN55022/CISPR-22
Technology Standards and Safety Compliance
Table A-1. Technology Standards and Safety Compliance
Laser safety information
Technology Compatible
with these IEEE
standards
EN/IEC
standard
compliance
SFP
("mini-GBIC")
Lasers
X2
Lasers
SFP+
Lasers
Media
Converter
Lasers
10-T
100-TX
1000-T
10GBASE-T
IEEE 802.3
10BASE-T
IEEE 802.3u
100BASE-TX
IEEE 802.3ab
1000BASE-T
IEEE 802.3an
10GBASE-T
100-FX
IEEE 802.3u
100BASE-FX
EN/IEC 60825 Class 1 Laser
Product
Laser Klasse 1
100-BX
IEEE 802.3ah
100BASE-BX10
EN/IEC 60825 Class 1 Laser
Product
Laser Klasse 1
1000-SX
IEEE 802.3z
1000BASE-SX
EN/IEC 60825 Class 1 Laser
Product
Laser Klasse 1