Specifications
Table Of Contents
- HP 8200 zl Switches
- Installation and Getting Started Guide
- Contents
- Introducing the HP 8200 zl Switches
- Installing the HP 8200 zl Switches
- Included Parts
- Power Cords
- Installation Procedures
- Summary
- Installation Precautions
- 1. Prepare the Installation Site
- 2. Mount the Switch Chassis
- 3. Install the Switch Modules
- 4. Install the Power Supplies
- 5. Verify the Switch Passes Self Test
- 6. Install the Grounding Wire
- 7. Connect the Switch to a Power Source
- 8. (Optional) Connect a Power Supply Shelf to the switch
- 9. Connect the Network Devices
- 10. (Optional) Connect a Console to the Switch
- Hot Swapping Switch Modules
- Example Network Topologies
- Getting Started With Switch Configuration
- Replacing Components
- Troubleshooting
- Specifications
- Switch Ports and Network Cables
- Cabling and Technology Information Specifications
- Mode Conditioning Patch Cord
- Twisted-Pair Cable/Connector Pin-Outs
- Safety and Regulatory Statements
- Recycle Statements
- Index
- Installation and Getting Started Guide
A-1
Specifications
A
Specifications
Physical
8212 zl Switch
Width: 44.45 cm (17.5 in)
Depth: 47.5 cm (18.7 in)
Height: 39.62 cm (15.6 in)
Weight:
• Switch 8212 zl (J9091A)
Chassis with Fan Tray
• Switch 8212 zl (J8715A/B) Base
System
• 20.30 kg (44.75 lbs)
• 22.88 kg (50.45 lbs)
8206 zl Switch
Width: 44.45 cm (17.5 in)
Depth: 47.5 cm (18.7 in)
Height: 26.29 cm (10.35 in)
Weight:
• Switch 8206 zl (J9475A)
Base System
17.36 kg (38.28 lbs)
Electrical
The HP Switch zl Internal Power Supplies automatically adjust to any voltage
between 100-127 and 200-240 volts.
J8712A J8713A
AC voltage: 100-127 volts 200-240 volts 200-240 volts
Maximum current: 12 A max 5 A max 10 A max
Frequency range: 50/60 Hz 50/60 Hz 50/60 Hz
PoE output wattage: 273 W 273 W 900 W