Product guide

IP Routing Features
Configuring OSPF
Configuring OSPF
Feature Default Page
Enable IP Routing and Global OSPF Routing disabled 5-56
Changing the RFC 1583 OSPF Compliance Setting enabled 5-57
Assign the Routing Switch to OSPF Areas n/a 5-59
Assign VLANs and/or Subnets to Each Area n/a 5-64
External Route Redistribution disabled 5-67
Configure Ranges on an ABR To Reduce Advertising n/a 5-70
Use Administrative Distance To Influence Route Choices 5-73
Generate OSPF Traps enabled 5-74
Cost Per Interface 1 5-76
Dead Interval Per Interface 40 sec. 5-76
Hello Interval Per Interface 10 sec. 5-77
Priority Per interface 1 5-77
Retransmit Interval Per Interface 5 sec. 5-78
Transit Delay Per Interface 1 sec. 5-78
Password and MD5 Authentication disabled 5-80, 5-81
Virtual Link Configuration n/a 5-82
Dead Interval on a Virtual Link 40 sec. 5-85
Hello Interval on a Virtual Link 10 sec. 5-86
Retransmit Interval on a Virtual Link 5 sec. 5-86
Transit Delay on a Virtual Link 1 sec. 5-87
Password and MD5 Authentication on a Virtual Link disabled 5-88, 5-89
Displaying OSPF Information n/a 5-90
This section describes how to configure OSPF using the CLI interface.
5-40