Product guide

IP Routing Features
Configuring RIP
■ Bad routes – The number of route entries that were not processed for
any reason.
■ Last update timeticks – How many seconds have passed since the
routing switch received an update from this peer neighbor.
Displaying RIP information for a specific peer: For example, to show
the RIP peer information for the peer with IP address 100.1.0.100, enter show
ip rip peer 100.1.0.100.
ProCurve# show ip rip peer 100.0.1.100
RIP peer information for 100.0.1.100
IP Address : 100.1.0.100
Bad routes : 0
Last update timeticks : 2
Figure 5-8. Example of Show IP RIP Peer < ip-addr > Output
This display lists the following information for a specific RIP peer:
■ IP Address – IP address of the RIP peer neighbor.
■ Bad routes – The number of route entries which were not processed for
any reason.
■ Last update timeticks – How many seconds have passed since the
routing switch received an update from this neighbor.
Displaying RIP Redistribution Information
To display RIP redistribution information, enter the show ip rip redistribute
command at any context level:
ProCurve# show ip rip redistribute
RIP redistributing
Route type Status
--------- ----- -
connected enabled
static disabled
ospf disabled
Figure 5-9. Example of Show IP RIP Redistribute Output
5-38