Product guide

IP Routing Features
Configuring RIP
Figure 5-6. Example of Show IP RIP Interface Output by IP Address
The information shown in this display has the same fields as for the display
for a specific VLAN ID. See the previous page for the definitions of these fields.
Syntax: show ip rip interface [ip-addr | vlan < vlan-id >]
Displaying RIP Peer Information
To display RIP peer information, enter the show ip rip peer command at any
context level.
The resulting display will appear similar to the following:
ProCurve# show ip rip peer
RIP peer information
IP Address Bad routes Last update timeticks
--------------- ----------- ---------------------
100.1.0.100 0 1
100.2.0.100 0 0
100.3.0.100 0 2
100.10.0.100 0 1
Figure 5-7. Example of Show IP RIP Peer Output
This display lists all neighboring routers from which the routing switch has
received RIP updates. The following fields are displayed:
■ IP Address – IP address of the RIP peer neighbor.
5-37