Product guide

Static Virtual LANs (VLANs)
Configuring VLANs
Syntax: show vlan ports < port-list >
802.1Q VLAN ID: The VLAN identification number, or VID. Refer
to “Terminology” on page 2-6.
Name: The default or specified name assigned to the VLAN. For
a static VLAN, the default name consists of VLAN-x where “x”
matches the VID assigned to that VLAN. For a dynamic VLAN,
the name consists of GVRP_x where “x” matches the applicable
VID.
Status:
Port-Based: Port-Based, static VLAN
Protocol: Protocol-Based, static VLAN
Dynamic: Port-Based, temporary VLAN learned through
GVRP (Refer to chapter 3, “GVRP” .)
Voice: Indicates whether a (port-based) VLAN is configured as
a voice VLAN. Refer to “Voice VLANs” on page 2-51.
For example:
ProCurve Switch 4204vl# show vlan ports a1-a33
Status and Counters - VLAN Information - for ports
a1-a33
Figure 2-19. Example of “Show VLAN Ports” listing
Displaying the Configuration for a Particular VLAN . This command
uses the VID to identify and display the data for a specific static or dynamic
VLAN.
2-31