Product guide

IP Routing Features
Configuring OSPF
ProCurve Switch 5304XL(config)# show running
Running configuration:
; J4850A Configuration Editor; Created on
release #E.10.00
hostname "ProCurve Switch 5304xl"
module 1 type J4820A
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
Indicates a non-default IP load-sharing configuration
untagged A1-A24
allowing three equal-cost next-hop paths for routed traffic
with different subnet destinations. If the router is configured
exit
with the default IP load-sharing configuration, IP load-
sharing does not appear in the show config or show running
access-controller vlan-base 2000
command output.
ip load-sharing 3
ip address dhcp-bootp
Figure 11-26.Displaying a Non-Default IP Load-Sharing Configuration
11-72