Product guide

IP Routing Features
Configuring RIP
Not e ICMP Host Unreachable Message for Undeliverable ARPs. If the
routing switch receives an ARP request packet that it is unable to deliver to
the final destination because of the ARP timeout and no ARP response is
received (the routing switch knows of no route to the destination address),
the routing switch sends an ICMP Host Unreachable message to the source.
RIP Parameters and Defaults
The following tables list the RIP parameters, their default values, and where
to find configuration information.
RIP Global Parameters
11-3 lists the global RIP parameters and their default values.
Table 11-3. RIP Global Parameters
Parameter
RIP state
auto-summary
metric
redistribution
Description
Routing Information Protocol V2-only.
Enable/Disable advertisement of summarized routes.
Default metric for imported routes.
RIP can redistribute static and connected routes. (RIP
redistributes connected routes by default, when RIP is
enabled.)
Default
Disabled
Enabled
1
Disabled
RIP Interface Parameters
11-4 lists the VLAN interface RIP parameters and their default values.
Not e RIP interface configuration is performed on VLAN interfaces in the switches
covered by this manual.
11-22