Product guide

Access Control Lists (ACLs) for the Series 5300xl Switches
Editing ACLs and Creating an ACL Offline
■ Deny all traffic from VLAN 30 (10.10.30.0) to the server at 10.10.10.100
on VLAN 10 (without ACL logging), but allow any other traffic from
VLAN 30 to VLAN 10.
■ Deny all other inbound traffic to VLAN 20. (Hint: The implicit “deny
any” can achieve this objective.)
1. You would create a .txt file with the content shown in figure 9-24.
You can use the “ ;“ character to denote a comment.
The file stored on your TFTP server retains
comments, and they appear when you use copy to
download the ACL command file. (Comments are not
saved in the switch configuration.)
Enables a
comment
in the file.
Blank lines in the file
cause breaks in the
displayed line-
numbering sequence
when you copy the
command file to the
switch. This is normal
operation. (See
figure 9-25.)
Figure 9-24. Example of a.txt File Designed for Creating an ACL
9-57