Product guide

10-85
Access Control Lists (ACLs)
Deleting an ACL
Deleting an ACL
Syntax: no ip access-list standard < name-str | 1-99 >
no ip access-list extended < name-str | 100-199 >
no access-list < 1 - 99 | 100 - 199 >
Removes the specified ACL from the switch’s running-
config file.
Note: Deleting an ACL does not delete any assignment of
that ACL’s identifier on a specific interface. Creating a new
ACL using an identifier that is already configured on an
interface causes the switch to automatically activate that
ACL. If you need to remove an ACL identifier assignment
on an interface, refer to “Adding or Removing an ACL
Assignment On an Interface” on page 10-81