System information

Using the HP Web Browser Interface
Tasks for Your First HP Web Browser Interface Session
4. For the Radio Status, clear the Shutdown box to enable radio communica-
tions.
5. Select the radio channel from the scroll-down box, or mark the Enable
radio button for Auto Channel Select.
6. Click the
[Apply Changes] button to save the settings.
Figure 4-8. Radio Channel Selection
Configuring TCP/IP Settings
You can use the web browser interface to manage the access point only if it
already has an IP address that is reachable through your network. You can set
an initial IP address for the access point by using the CLI interface. After you
have network access to the access point, you can then use the web browser
interface to modify the initial IP configuration.
1. Click the Configuration tab, and then click the
[IP Configuration] button.
2. Select either Obtain the IP Address from the DHCP Server or Use the Static IP
Address below.
4-14