System information

Using the HP Web Browser Interface
Tasks for Your First HP Web Browser Interface Session
Setting the Radio Channel
The access point’s radio channel settings are limited by local regulations,
which determine the number of channels that are available. You can manually
set the access point’s radio channel or allow it to automatically select an
unoccupied channel.
No t e If you are using the worldwide product, J8131A, before configuring radio
settings on the access point, you must first use the CLI to set the Country Code
so that the radio channels used conform to your local regulations. See “Setting
the Country Code” on page 6-3.
The access point uses the configured radio channel to communicate with
wireless clients. When multiple access points are deployed in the same area,
be sure to choose a channel separated by at least five channels to avoid having
the channels interfere with each other. You can deploy up to three access
points in the same area (for example, channels 1, 6, 11).
1. Click the Configuration tab, and then click the
[Port/Radio Settings] button.
2. Select the Working Mode.
3. Click the
[Radio Mode Change] button.
Figure 4-7. Changing the Radio Working Mode
4-13