System information

Using the HP Web Browser Interface
General Features
• Neighbor access point detection (page 4-24)
General Features
The access point includes these web browser interface features:
Access Point Configuration:
• System identification
• IP settings via manual configuration or DHCP
• RADIUS accounting server identification
• Filter control between wireless clients, between wireless clients and
the management interface, or for specified protocol types
• SNMP community strings, trap managers, and SNMPv3 settings
• Usernames and passwords
• Firmware upgrade and system reset
• System log server and log message levels
• SNTP client and manual clock configuration
• Neighbor access point detection
Access Point Radio Interface:
• Radio signal parameters
• Up to eight service set identifier (SSID) interfaces
• RADIUS client identification
• Wireless client authentication via IEEE 802.1X
• Wireless client security, including WEP, WPA, and WPA2
Access Point status
• System configuration
• Wireless configuration
• Station status
• Event logs
4-3