System information

---- -------------------------- ----------------
File Transfers
Downloading Access Point Software
The following example shows how to download new software to the access
point using a TFTP server.
HP420#copy tftp file
1. Application image
2. Config file
3. Boot block image
4. Text Config file
Select the type of download<1-4>: [1]:1
TFTP Source file name:hp420-2100B14.bin
TFTP Server IP:192.168.1.10
Updating Boot Line in NVRAM, please wait!
Removing old runtime! Please wait a few minutes!
Creating file! Please wait a few minutes!
TFTP transfer succeeded!
Warning! Updating firmware may cause configuration settings to be
incompatible.
(Suggestion:Using new default configuration settings lets system be more
efficient,but system will lose current settings.)
Do you want to reset to FACTORY DEFAULT SETTINGS? <y/n> [n]: n
HP420#dir
File Name Type File Size(Bytes)
dflt-img.bin 2 1109542
hp420-2100B14.bin 2 1713706
syscfg 5 46638
syscfg_bak 5 46638
Boot Rom Version : v3.0.6
Software Version : v2.1.0.0B12
131072 byte(s) available
HP420#reset board
Reboot system now? <y/n>: y
When the access point finishes downloading the file from the server, a number
a messages are displayed as the software is installed before a prompt “Do you
want to reset to FACTORY DEFAULT SETTINGS? <y/n> [n]:” appears.
Type “y” to reset the configuration to default values and reboot the access
point to activate the downloaded software. Type “n” to continue to use the
current configuration settings without rebooting.
A-7