System information

Command Line Reference
VLAN Commands
• static - Clients are assigned to the default VLAN ID of the associated
SSID interface. VLAN assignment from a RADIUS server is not
allowed.
• dynamic - VLAN IDs are assigned from a RADIUS server, if config-
ured. Otherwise, clients are assigned to the default VLAN ID of the
associated SSID interface.
Default
Disabled
Command Mode
Global Configuration
Command Usage
When VLAN support is enabled or disabled on the access point, the system
requires a reboot.
Example
HP420(config)#vlan enable static
Reboot system now? <y/n>: y
management-vlanid
This command configures the management VLAN ID for the access point.
Syntax
management-vlanid <vlan-id> <tagged | untagged>
• vlan-id - Management VLAN ID. (Range: 1-4094)
• tagged - Management traffic is sent tagged with the VLAN ID.
Received management traffic must be tagged with the VLAN ID.
• untagged - Management traffic is sent untagged. Received manage-
ment traffic that is untagged is accepted for access point manage-
ment.
Default Setting
1
Command Mode
Global Configuration
8-131