System information

Command Line Reference
802.1X Authentication
show authentication
This command shows all MAC address and 802.1X authentication settings, as
well as the MAC address filter table.
Command Mode
Exec
Example
HP420#show authentication
11g 802.1x Authentication Information
============================================================================
ssid 802.1x BroadcastKeyRefreshRate SessionKeyRefreshRate SessionTimeout
============================================================================
1 DISABLED 0 min 0 min 0 secs
2 DISABLED 0 min 0 min 0 secs
3 DISABLED 0 min 0 min 0 secs
4 DISABLED 0 min 0 min 0 secs
5 DISABLED 0 min 0 min 0 secs
6 DISABLED 0 min 0 min 0 secs
7 DISABLED 0 min 0 min 0 secs
8 DISABLED 0 min 0 min 0 secs
11g MAC Authentication Information
============================================================================
ssid AuthMode SessionTimeout
============================================================================
1 DISABLED 0 secs
2 DISABLED 0 secs
3 DISABLED 0 secs
4 DISABLED 0 secs
5 DISABLED 0 secs
6 DISABLED 0 secs
7 DISABLED 0 secs
8 DISABLED 0 secs
AP Supplicant configuration:
============================================================================
802.1x supplicant : DISABLED
802.1x supplicant user : EMPTY
802.1x supplicant password : EMPTY
8-76