System information

Command Line Reference
SNMP Commands
show snmp-server
This command displays the SNMP configuration settings.
Command Mode
Exec
Example
HP420#show snmp-server
SNMP Information
==============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : WC-19
Contact : Paul
Version Filter : Enable SNMPv1, SNMPv2c
: Disable SNMPv3
EngineId :00:00:00:0b:00:00:00:0d:9d:c6:98:7e
EngineBoots:13
Trap Destinations:
1: 192.168.1.10, Community: *****, State: Enabled
2: 192.168.1.19, Community: *****, State: Enabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
hpdot11StationAssociation Enabled hpdot11StationReAssociation Enabled
hpdot11StationAuthentication Enabled hpdot11StationRequestFail Enabled
hpdot11InterfaceFail Enabled dot1xMacAddrAuthSuccess Enabled
dot1xMacAddrAuthFail Enabled dot1xAuthNotInitiated Enabled
dot1xAuthSuccess Enabled dot1xAuthFail Enabled
localMacAddrAuthSuccess Enabled localMacAddrAuthFail Enabled
iappStationRoamedFrom Enabled iappStationRoamedTo Enabled
iappContextDataSent Enabled sntpServerFail Enabled
sysSystemUp Enabled sysSystemDown Enabled
sysRadiusServerChanged Enabled sysConfigFileVersionChanged Enabled
dot1xSupplicantAuthenticated Enabled wirelessExternalAntenna Enabled
possibleRogueApDetected Enabled httpEnableStatusSet Enabled
httpsEnableStatusSet Enabled cliSerialPortEnableStatusSet Enabled
cliTelnetPortEnableStatusSet Enabled snmpVersionFilterSet Enabled
resetButtonEnableStatusSet Enabled vlanEnableStatusSet Enabled
vlanUntaggedSet Enabled mgntVlanIdSet Enabled
8-53