System information

Command Line Reference
SNMP Commands
– hpdot11StationRequestFail - A client station has failed associa-
tion, re-association, or authentication.
– dot1xAuthFail - A 802.1X client station has failed RADIUS authen-
tication.
– dot1xAuthNotInitiated - A client station did not initiate 802.1X
authentication.
– dot1xAuthSuccess - An 802.1X client station has been success-
fully authenticated by the RADIUS server.
– dot1xMacAddrAuthFail - A client station has failed MAC address
authentication with the RADIUS server.
– dot1xMacAddrAuthSuccess - A client station has successfully
authenticated its MAC address with the RADIUS server.
– dot1xSuppAuthenticated - The access point has been successfully
authenticated with the RADIUS server.
– httpEnableStatusSet - The access point’s web server has been
enabled or disabled.
– httpsEnableStatusSet -The access point’s secure web server has
been enabled or disabled.
– iappContextDataSent - A client station’s Context Data has been
sent to another access point with which the station has associ-
ated.
– iappStationRoamedFrom - A client station has roamed from
another access point (identified by its IP address).
– iappStationRoamedTo - A client station has roamed to another
access point (identified by its IP address).
– localMacAddrAuthFail - A client station has failed authentication
with the local MAC address database on the access point.
– localMacAddrAuthSuccess - A client station has successfully
authenticated its MAC address witht the local database on the
access point.
– mgntVlanIdSet - The access point’s management VLAN ID has
been changed.
– possibleRogueApDetected - An access point has been detected
during a neighbor detection scan.
– resetButtonEnableStatusSet - The access point’s reset button has
been enabled or disabled.
– snmpVersionFilterSet - The filter for SNMPv3 or SNMP v1/v2
management access has been changed.
– sntpServerFail - The access point has failed to set the time from
the configured SNTP server.
– ssidPrimarySet - The access point’s primary SSID has been
changed.
– sysConfigFileVersionChanged - The access point’s software file
has been changed.
8-44