System information

Command Line Reference
System Management Commands
Default Setting
Status: Enabled
Maximum Sessions: 4
Command Mode
Management Configuration
Example
HP420(config-mgmt)#cli telnet session 2
HP420(config-mgmt)#cli telnet enable
HP420(config-mgmt)#
ssh enable
This command enables the Secure Shell server. Use the no form to disable the
server.
Syntax
ssh enable
no ssh
Default Setting
Enabled
Command Mode
Management Configuration
Command Usage
• The access point supports Secure Shell version 2.0 only.
• After boot up, the SSH server needs about two minutes to generate
host encryption keys. The SSH server is disabled while the keys are
being generated. The show system command displays the status of the
SSH server.
8-18