System information

Command Line Reference
System Management Commands
Command Mode
Management Configuration
Example
HP420(config-mgmt)#password-admin hp420ap
HP420(config-mgmt)#
user add
This command configures a user name account for management access.
Syntax
user add <cli | web | cli+web> <privilege> <name> <password>
• cli - Allows the user CLI access only.
• web - Allows the user Web access only.
• cli+web - Allows the user CLI and Web access.
• privilege - The privilege level of the user.
– operator - Allows the user only read access.
• name - The name of the user.
(Length: 3-16 characters, case sensitive.)
• password - The password of the user.
(Length: 0-16 characters, case sensitive.)
Default Setting
none
Command Mode
Management Configuration
Command Usage
• The access point currently allows only one operator name and pass-
word to be configured. An operator has read-only access to the
specified management interface.
• A maximum of only two users can be configured on the access point,
one Manager and one Operator.
• CLI access includes the serial console, Telnet, and SSH.
• Web access includes both HTTP and secure HTTPS.
8-15