System information

Command Line Reference
System Management Commands
Example
HP420#configure
HP420(config)#management
HP420(config-mgmt)#
username-admin
This command configures the Manager (administrator) user name for manage-
ment access.
Syntax
username-admin <name>
name - The name of the administrator.
(Length: 3-16 characters, case sensitive.)
Default Setting
admin
Command Mode
Management Configuration
Example
HP420(config-mgmt)#username-admin bob
HP420(config-mgmt)#
password-admin
This command configures the Manager (administrator) password for manage-
ment access. Use the no form to reset the default password.
Syntax
password-admin <password>
no password-admin
password - Password for administrator access.
(Length: 3-16 characters, case sensitive)
Default Setting
None
8-14