System information

Command Line Reference
System Management Commands
System Management Commands
These commands are used to configure the user name, password, system logs,
browser management options, clock settings, and a variety of other system
information.
Command Function Mode Page
Country Setting
country Sets the access point country code Exec 8-10
Device Designation
prompt Customizes the command line prompt GC 8-12
system name Specifies the host name for the access point GC 8-13
Management Access
management Enters management configuration mode GC 8-13
username-admin Configures the administrator user name for MC 8-14
management access
password-admin Specifies the administrator password for MC 8-14
management access
user add Adds an operator user name and password for CLI MC 8-15
or Web management access
user del Removes an operator user name MC 8-16
user pwd Changes the password for an existing user MC 8-16
cli serial Enables the access point to be managed through the MC 8-17
serial console port
cli telnet Enables the access point to be managed through a MC 8-17
Telnet connection
ssh enable Enables the Secure Shell server MC 8-18
ssh port Sets the Secure Shell port MC 8-19
snmpv3 Enables management access for SNMPv3 and MC 8-19
SNMP v1/v2 clients
reset-button Enables the access point to be reset by pressing its MC 8-20
enable reset button
show users Displays current configured users Exec 8-21
8-9