System information

Command Line Reference
Overview
Overview
This chapter describes the commands provided by the CLI.
The CLI commands can be broken down into the functional groups shown
below.
Command Group Description Page
General Basic commands for entering configuration mode, restarting 8-4
the system, or quitting the CLI
System Management Controls user name, password, browser management 8-9
options, and a variety of other system information
System Logging Configures system logging parameters 8-28
System Clock Configures SNTP and system clock settings 8-34
SNMP Configures community access strings and trap managers 8-39
Flash/File Manages code image or access point configuration files 8-54
RADIUS Configures the RADIUS client used with 802.1X 8-61
Athentication authentication
RADIUS Accounting Configures RADIUS accounting 8-67
802.1X Configures 802.1X authentication 8-72
Authentication
MAC Address Configures MAC address authentication 8-78
Authentication
Filtering Filters communications between wireless clients, controls
8-82
access to the management interface from wireless clients,
and filters traffic using specific Ethernet protocol types
Ethernet Interface Configures connection parameters for the Ethernet 8-86
interface
Wireless Interface Configures radio interface settings 8-93
Wireless Security Configures wireless security and encryption settings 8-115
Neighbor AP Configures settings for the detection of neighbor access 8-124
Detection points
IAPP Enables roaming between multi-vendor access points 8-129
VLANs Configures VLAN membership 8-130
8-2