System information

---------------------
Wireless Security Configuration
Configuring MAC Address Authentication
Displaying MAC Authentication Settings. The following example shows
how to display the current authentication configuration on the access point
from the Exec level.
HP420#show authentication
11g 802.1x Authentication Information
============================================================================
ssid 802.1x BroadcastKeyRefreshRate SessionKeyRefreshRate SessionTimeout
============================================================================
1 DISABLED 0 min 0 min 0 secs
2 DISABLED 0 min 0 min 0 secs
3 DISABLED 0 min 0 min 0 secs
4 DISABLED 0 min 0 min 0 secs
5 DISABLED 0 min 0 min 0 secs
6 DISABLED 0 min 0 min 0 secs
7 DISABLED 0 min 0 min 0 secs
8 DISABLED 0 min 0 min 0 secs
11g MAC Authentication Information
============================================================================
ssid AuthMode SessionTimeout
============================================================================
1 LOCAL 0 secs
2 DISABLED 0 secs
3 DISABLED 0 secs
4 DISABLED 0 secs
5 DISABLED 0 secs
6 DISABLED 0 secs
7 DISABLED 0 secs
8 DISABLED 0 secs
AP Supplicant configuration:
============================================================================
802.1x supplicant : DISABLED
802.1x supplicant user : EMPTY
802.1x supplicant password : EMPTY
MAC filter default permision for each SSID(A: Allow, D: Disallow)
SSID: 1 2 3 4 5 6 7 8
PERM: A A A A A A A A
7-36