System information

Wireless Security Configuration
Configuring RADIUS Client Authentication
To display the current RADIUS server settings from the Exec level, use the
show radius command, as shown in the following example.
HP420#show radius
11g Radius Authentication Server Information
============================================================================
ssid IP Port Retransmit Timeout Mac-format Vlan-format
============================================================================
1 (P)10.1.2.25 1812 5 10 SINGLE_DASH ASCII
1 (S)10.1.1.103 1812 3 5 SINGLE_DASH ASCII
2 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
2 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
3 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
3 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
4 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
4 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
5 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
5 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
6 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
6 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
7 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
7 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
8 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
8 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
============================================================================
11g Radius Accounting Server Information: Disabled
============================================================================
index IP AcctPort Retransmit Timeout InterimUpdate
============================================================================
1 (P) 0.0.0.0 1813 3 5 3600
2 (S) 0.0.0.0 1813 3 5 3600
============================================================================
HP420#
7-30