System information

Wireless Security Configuration
Configuring RADIUS Client Authentication
Command Syntax CLI Reference Page
radius-authentication-server mac-format <multi-colon | multi-dash | page 8-64
no-delimiter | single-dash>
radius-authentication-server vlan-format <hex | ascii> page 8-65
show radius page 8-65
The following example shows how to configure the primary RADIUS server
parameters, including the IP address, UDP port number, secret key, timeout,
retransmit attempts, and the MAC address and VLAN ID formats.
HP420(if-wireless-g-ssid-1)#radius-authentication-server address 10.1.2.25
HP420(if-wireless-g-ssid-1)#radius-authentication-server port 1812
HP420(if-wireless-g-ssid-1)#radius-authentication-server key green
HP420(if-wireless-g-ssid-1)#radius-authentication-server timeout 10
HP420(if-wireless-g-ssid-1)#radius-authentication-server retransmit 5
HP420(if-wireless-g-ssid-1)#radius-authentication-server mac-format single-
dash
HP420(if-wireless-g-ssid-1)#radius-authentication-server vlan-format ascii
HP420(if-wireless-g-ssid-1)#
The following example shows how to configure the secondary RADIUS server
IP address and secret key.
HP420(if-wireless-g-ssid-1)#radius-authentication-server secondary address
10.1.1.103
HP420(if-wireless-g-ssid-1)#radius-authentication-server secondary key blue
HP420(if-wireless-g-ssid-1)#
7-29