System information

Wireless Security Configuration
Using the Security Wizard
To Configure Static WEP Shared Keys:
No t e The four WEP keys are common to all SSID interfaces. Only one key index
can be assigned to an SSID interface, so there can be a maximum of only four
SSID interfaces using static WEP shared keys.
1. From the Wireless Interfaces SSID Configuration window, click the [Security
Suite]
button.
2. Select wizard option 2. Static WEP.
3. Select the key length to be used by all clients, 64, 128, or 152 bit.
4. Select the Key Type, Hex or Ascii.
5. For the Key Index, select an open key to be used for encryption for the
SSID interface.
6. Enter the key value conforming the length and type already selected.
7. Click the
[Apply Changes] button.
To Configure Dynamic WEP Keys:
1. From the Wireless Interfaces SSID Configuration window, click the [
Security
Suite]
button.
2. Select wizard option 5. Dynamic WEP (802.1x).
3. Click the
[Apply Changes] button.
4. Click the Radius Server link.
5. Configure parameters for the primary RADIUS server and, optionally, a
secondary RADIUS server. See “Web: Setting RADIUS Server Parameters”
on page 7-26 for more details.
6. Click the
[Advanced Settings] button.
7. For the Broadcast Key Refresh Rate, enter a time period between 0
(disabled) and 1440 minutes.
8. For the Session Key Refresh Rate, enter a time period between 0 (disabled)
and 1440 minutes.
9. For the 802.1x Re-Authentication Refresh Rate, enter a time period between
0 (disabled) and 65535 seconds.
10. Click the
[Apply Changes] button.
To Configure WPA with 802.1X:
7-16