System information

Getting Started
Conventions
■ Italics indicate variables for which you must supply a value when
executing the command. For example, in this command syntax,
<host_ip_address | host_name > indicates that you must provide an IP
address or a host name:
Syntax: radius-accounting-server [secondary] address <host_ip_address |
host_name>
Command Prompts
In the default configuration, your access point displays the following CLI
prompt:
HP ProCurve Access Point 420#
To simplify recognition, this guide uses HP420 to represent command
prompt. For example:
HP420#
(You can use the prompt command to change the text in the CLI prompt.)
Screen Simulations
Figures containing simulated screen text and command output look like this:
HP420#show version
Software Version : v2.1.0.0B12
Boot Rom Version : v3.0.6
Hardware version : R02
HP420#
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear outside of a num-
bered figure. For example:
HP420(if-ethernet)#ip address 192.168.1.2 255.255.255.0
192.168.1.253
HP420(if-ethernet)#dns primary-server 192.168.1.55
1-3