System information

Wireless Interface Configuration
Configuring Radio Settings
To display the current radio settings from the Exec level, use the show interface
wireless g command, as shown in the following example.
HP420#show interface wireless g
Wireless Interface Common Information
============================================================
----------------Identification------------------------------
Description : RD-AP#3
Radio mode : 802.11g only
Channel : 9
Supported SSID number : 8
Supported Total Client number : 64
Status : Enabled
----------------802.11 Parameters---------------------------
Transmit Power : 50% (6 dBm)
Max Station Data Rate : 24Mbps
Multicast Data Rate : 2Mbps
Fragmentation Threshold : 2024 bytes
RTS Threshold : 2000 bytes
Beacon Interval : 60 TUs
Authentication Timeout Interval : 60 Mins
Association Timeout Interval : 30 Mins
DTIM Interval : 2 beacon
Preamble Length : SHORT-OR-LONG
Slot time : SHORT
----------------Security------------------------------------
Static Keys :
Key 1: OPEN Key 2: OPEN Key 3: OPEN Key 4: OPEN
----------------Antenna-------------------------------------
Antenna mode : Diversity
Antenna gain attenuation
Low channel : 100%
Mid channel : 100%
High channel : 100%
============================================================
HP420#
6-15