System information

Wireless Interface Configuration
Configuring Radio Settings
Command Syntax CLI Reference Page
rts-threshold <threshold> page 8-105
slot-time [short | long | auto] page 8-106
preamble [long | shortorlong] page 8-107
transmit-power <signal-strength> page 8-108
max-association <count> page 8-109
[no] shutdown page 8-110
show interface wireless g page 8-111
No t e You must set the Country Code and radio mode before configuring other radio
settings. These basic settings affect the radio channels and values that are
available for other parameters.
The following example shows how to enable and disable the radio, as well as
configure other radio parameters.
HP420(config)#interface wireless g
Enter Wireless configuration commands, one per line.
HP420(if-wireless-g)#shutdown
HP420(if-wireless-g)#description RD-AP#3
HP420(if-wireless-g)#speed 24
HP420(if-wireless-g)#slot-time short
HP420(if-wireless-g)#preamble short-or-long
HP420(if-wireless-g)#transmit-power 50%
HP420(if-wireless-g)#no shutdown
HP420(if-wireless-g)#channel 9
HP420(if-wireless-g)#beacon-interval 60
HP420(if-wireless-g)#dtim-period 2
HP420(if-wireless-g)#fragmentation-length 1024
HP420(if-wireless-g)#rts-threshold 2000
HP420(if-wireless-g)#max-association 64
6-14